collapse

Author Topic: [Help] New Construction and Prepping for Hydroseeding  (Read 332 times)

0 Members and 1 Guest are viewing this topic.

Offline torque

  • New Member
  • *
  • Location: MI - Michigan
  • Posts: 4
[Help] New Construction and Prepping for Hydroseeding
« on: Wed August 02, 2017, 10:28:51 PM »
I've recently had my home construction complete. As such the builder has completed a "final grade" and that is it. It is up to me to have a lawn put in. I plan on hiring a company to do this, however, based on research, it doesn't sound like many of the companies perform the necessary prep work.

My home is located in Michigan, and the "lawn" is currently made up of a mix of dirt, sand, and a mixture of crabgrass and weeds.

From what I understand the proper procedure is as follows:

1. Spray with herbicide to kill all existing foliage.
2. Wait 2-3 weeks, and spray any remaining foliage.
3. Wait 2-3 weeks for remaining foliage to die.
4. Rake all rocks, debris, and dead weeds/grass out.
5. Hydroseed company will come and harley rake/till the yard.
6. Final grade will be performed on the lawn.
7. 4-6" of top soil shall be laid down.
8. Top soil will be mixed ~5" down into existing ground.
9. Lawn will be hydroseeded.

What I am unclear is on what herbicide to use, and if I am missing any steps.

Any help would be appreciated.


Offline Turboguy

  • Administrator
  • Forum Legend
  • *****
  • Location: Beaver Falls, PA
  • Posts: 5624
  • Beaver Falls, PA
    • Turbo Turf HydroSeeding Systems
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #1 on: Thu August 03, 2017, 08:49:46 AM »
Hello Torque,

That sound like a good plan.  10 days to two weeks should be ok for the spray intervals.  I would suggest using Roundup or the equivalent.  It only affects growing plants and won't have any effect on seed germination.  I don't think you are missing any steps.
Turbo Turf HS-300-XPW +The new for next year HS-400-ZH.

Offline torque

  • New Member
  • *
  • Location: MI - Michigan
  • Posts: 4
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #2 on: Thu August 03, 2017, 03:47:09 PM »
It appears as though there are many variants of Round-Up? Is there one that is usually specifically recommended?

Offline Turboguy

  • Administrator
  • Forum Legend
  • *****
  • Location: Beaver Falls, PA
  • Posts: 5624
  • Beaver Falls, PA
    • Turbo Turf HydroSeeding Systems
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #3 on: Thu August 03, 2017, 03:58:49 PM »
The primary ingredient in RoundUp is glyphosate.  Most of the variations I have seen were either in packaging or in products that were concentrated or ready to spray.  There are other companies selling glyphosate under different names and any of those should work.
Turbo Turf HS-300-XPW +The new for next year HS-400-ZH.

Offline landscaper1009

  • Forum Guru
  • ****
  • Location: Bel Air, Maryland
  • Posts: 263
  • If I can't help, I'll send you to someone that can
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #4 on: Thu August 03, 2017, 06:29:33 PM »
Torque - Don't assume the contractor you hire will do all the steps you have outlined.  You should have a written agreement so there can be no confusion or misunderstanding.

In lieu of placing "topsoil", you might check into having a couple inches of good compost applied directly to the surface.  Topsoil quality can vary based upon its origin and organic content. 

Good luck and post a few before, during and after shots.
TB Master LLC
P/T ECS
Permanent / Temporary Erosion Controls Solutions
1009 Londondery Dr
Bel Air, MD  21015

410-627-6110 Cell
Tom Master
tbmaster1009@gmail.com
Formerly Wolbert & Master, Inc.
Est. 1968

Offline torque

  • New Member
  • *
  • Location: MI - Michigan
  • Posts: 4
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #5 on: Sat August 05, 2017, 11:25:55 AM »
Thank you all for the help.

After doing more research into the herbicide it appears as though a post-emergent is proper selection. Based on my understanding, the post emergent will kill the existing crab grass and weeds, but will not affect new seeds(assuming a fair amount between spraying the herbicide and hydroseeding).

Is my understanding correct regarding this?

Offline Turboguy

  • Administrator
  • Forum Legend
  • *****
  • Location: Beaver Falls, PA
  • Posts: 5624
  • Beaver Falls, PA
    • Turbo Turf HydroSeeding Systems
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #6 on: Sun August 06, 2017, 09:23:22 AM »
Yes, that is correct.  A post emergent will only kill plants that are living and doesn't affect seed germination.   
Turbo Turf HS-300-XPW +The new for next year HS-400-ZH.

Offline torque

  • New Member
  • *
  • Location: MI - Michigan
  • Posts: 4
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #7 on: Mon August 07, 2017, 10:22:42 AM »
Do you have any experience with this product? I believe it meets my needs:

https://www.roundup.com/smg/goprod/roundup-weed-grass-killer-super-concentrate/prod70348/

Offline Turboguy

  • Administrator
  • Forum Legend
  • *****
  • Location: Beaver Falls, PA
  • Posts: 5624
  • Beaver Falls, PA
    • Turbo Turf HydroSeeding Systems
Re: [Help] New Construction and Prepping for Hydroseeding
« Reply #8 on: Mon August 07, 2017, 11:22:52 AM »
I don't do any spraying of herbicides professionally but have used that exact same product here for years and it would do exactly what you want and be perfect for your needs.
Turbo Turf HS-300-XPW +The new for next year HS-400-ZH.

 

* Recent Posts

Re: Bowie 300 vs Epic L30 by dawrule
[Today at 01:24:10 AM]


Turbo Turf's Big Inventory Reduction Sale by Turboguy
[Yesterday at 09:06:59 AM]


Re: Bowie 300 vs Epic L30 by landscaper1009
[Mon August 21, 2017, 06:33:23 PM]


Re: Bowie 300 vs Epic L30 by Bowie Man
[Mon August 21, 2017, 09:46:42 AM]


Re: Bowie 300 vs Epic L30 by Turboguy
[Sun August 20, 2017, 05:03:03 PM]

* Calendar

August 2017
Sun Mon Tue Wed Thu Fri Sat
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 [23] 24 25 26
27 28 29 30 31

No calendar events were found.